Swapping individual drives within an existing drive setup

  • 222 Views
  • Last Post 08 November 2017
Matthew Phillips posted this 08 November 2017

Hi guys,  I have a Pegasus2 R4 with existing drives but are almost full.  I have a large job coming up soon in which I need more room.  We would like to purchase a 3TB drive for this specific client and keep all their files and assets on.  Can we simply remove one existing drive and replace it with a new one for this purpose, or are there better ways to deal with this situation?

Order By: Standard | Latest | Votes
Matthew Phillips posted this 08 November 2017

Hi Devendra,

Thanks for your prompt reply.  Great, will do.  Many thanks for that. Important to know.  

Kind Regards

Matthew

Devendra Kumar posted this 08 November 2017

Hi Matthew,

We always recommend you to take backup of whole data then Shutdown the Pegasus unit and Remove & Mark the drive from slot 1 to 4 then insert new drive PD1 to PD4 and restore the data to the new drive. If you still would like access data from the existing drive, make sure shutdown the unit, insert all the existing drive and you ll be able access your old data.

Note : Do not pull the drive out when the unit turned on.

Thanks

Close