One of my 2TB drives went dead from my R6. I replaced the drive with 3TB, knowing it will waste 1TB and choose rebuild.
Now it's been 0% for almost 10 hours in Background activities and no indication of any action at all. Should I still wait or is there some error ?
Unit is configured as raid-6. Can I stop rebuild ?I'd like to make back up copies of most important files if possible and then try again.
Hi Matti,
Yes, you can stop rebuild and proceed to take a back up of your data and also make sure that you replace a faulty drive with compatible one to check if it rebuilds the array.
Below is the link to download the compatiblity list for Pegasus 1 series:
https://promise.com/DownloadFile.aspx?DownloadFileUID=4127
For any further assistance please create a web support ticket in support.promise.com or contact Promise Tech support: https://promise.com/ContactUS
Thanks..
Thank you. New drive is compatible, have replaced one before. Now I can't get prosess stopped.
Says "Failed to stop rebuild: another rebuild is pending".
I think I'll contact support.
Thank you. New drive is compatible, have replaced one before. Now I can't get prosess stopped.
Says "Failed to stop rebuild: another rebuild is pending".
I think I'll contact support.
Im having same issue, progress has stalled at 70% and only replaced drive is flashing. The other drives are not flashing?
