Pegasus 3 Thunderbolt 3 to Thunderbolt 2?

  • 2.3K Views
  • Last Post 22 March 2017
Ming Tshing posted this 21 March 2017

How can I attach a Pegasus 3 to a Mac Pro with only Thunderbolt 2 port? I tried the Apple Thunderbolt 3 to Thunderbolt 2 adpator with no success.

 

 

Order By: Standard | Latest | Votes
Venkatachalam Settu posted this 21 March 2017

Hi,

The adapter(thunderbolt 3 to thunderbolt 2) is the only option to connect the Pegasus3 unit to a mac machine which supports thunderbolt 2 connection. Please check if the thunderbolt cable is properly seated on both end, do try a different thunderbolt port on the Pegasus. The Blue thunderbolt indicator should be lit up just below the power button indicating a valid connection.

Thank you.

 

 

Ming Tshing posted this 21 March 2017

Goof to here that it should be working. I'll check when I get back into the office tomorrow. Thank you

Rob Burke posted this 21 March 2017

I'm having an issue with this as well, cannot get it to mount even though in system report it is showing up...Any luck on your end?

Rob Burke posted this 21 March 2017

Was able to get it working by installing the driver from the site...wish that was a little more obvious, I haven't had to manually install a driver for years. Here's the link https://www.promise.com/Support/downloadcenter#Drivers

Venkatachalam Settu posted this 22 March 2017

Hi,

The Pegasus3 hardware driver needs to be installed on your mac/windows machine in order to access the Pegasus3 volume.

Thank you.

 

 

Close