How can I attach a Pegasus 3 to a Mac Pro with only Thunderbolt 2 port? I tried the Apple Thunderbolt 3 to Thunderbolt 2 adpator with no success.
Pegasus 3 Thunderbolt 3 to Thunderbolt 2?
- 934 Views
- Last Post 22 March 2017
Ming Tshing
posted this
21 March 2017
Venkatachalam Settu
posted this
21 March 2017
Hi,
The adapter(thunderbolt 3 to thunderbolt 2) is the only option to connect the Pegasus3 unit to a mac machine which supports thunderbolt 2 connection. Please check if the thunderbolt cable is properly seated on both end, do try a different thunderbolt port on the Pegasus. The Blue thunderbolt indicator should be lit up just below the power button indicating a valid connection.
Thank you.
Ming Tshing
posted this
21 March 2017
Goof to here that it should be working. I'll check when I get back into the office tomorrow. Thank you
Rob Burke
posted this
21 March 2017
I'm having an issue with this as well, cannot get it to mount even though in system report it is showing up...Any luck on your end?
Rob Burke
posted this
21 March 2017
Was able to get it working by installing the driver from the site...wish that was a little more obvious, I haven't had to manually install a driver for years. Here's the link https://www.promise.com/Support/downloadcenter#Drivers
Venkatachalam Settu
posted this
22 March 2017
Hi,
The Pegasus3 hardware driver needs to be installed on your mac/windows machine in order to access the Pegasus3 volume.
Thank you.
