I'm hoping someone is able to help. We recently lost power to our VTrak E610f and three expansion chasis. Everything is powered up fine, but it appears the head unit cannot connect to the router any longer. Upon realizing that, I connected to the head until via the management port and serial-to-usb adapter and it appears to be stuck in a boot loop. This code repeats itself every couple of minutes:
PBL_ROM Ver 1.02.0000.01
Built 16:35:54, Nov 29 2007
Platform Setup completed
+execs
Load & Run: PBL_RAM
+Request IP addr from DHCP server: .............................................................
Ethernet eth0: MAC address 00:01:55:31:a2:6f
Can't get BOOTP info for device!
DHCP Enabled
Ethernet MAC address: 00:01:55:31:a2:6f
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
PBL_RAM Ver 1.02.0000.04
Built 10:57:33, Mar 18 2009
== Executing boot script in 30.000 seconds - enter ^C to abort
PBL_RAM> execs
Software modules check OK
SDRAM Size: 0x80000000, OS Size: 0x10000000
Flash size: 0x02000000, Flash blk size: 0x00020000, blk count: 0x00000100
Using base address 0x01008000 and length 0x001c3460
Loading software modules .......
Mutiple restarts have not fixed the issue, and I'm unable to enter login info or commands via the management port. Any help would be great appreciated. Thanks!
