Version WebPam Pro

  • 115 Views
  • Last Post 07 December 2020
  • Topic Is Solved
Albert Soubeyran posted this 05 December 2020

Hello, How did you configure the J830S ?? with the RJ11 / RS232 cable ??, I cannot connect to display the jbod dasn WebPam Pro :( Thank you for your help Albert

Attached Files

Order By: Standard | Latest | Votes
Gautham Sakthi posted this 06 December 2020

Hello Albert Soubeyran,

You will need a RJ11  to DB9 serial cable, do you have a Promise Serial cable ? Also for further support I request you to create a support case via support.promise.com.

 

Thanks!

  • Liked by
  • Albert Soubeyran
R P posted this 07 December 2020

Hi Albert,

The J830s is a JBOD, not a raidhead. There is no configuration. When you attach it to your computer with a SAS card, you will see all the disks you have installed in the JBOD.

  • Liked by
  • Albert Soubeyran
Albert Soubeyran posted this 07 December 2020

Good evening, Thank you for your message, then I connect with the RJ11 / Db9 cord on the jbod to configure it with the software promise WEBPAM PRO ??. Regards, Albert

Albert Soubeyran posted this 07 December 2020

Good evening, I saw on the internet that there is a Promise rj11 / db9 cord to connect to the jbod j830s with the WEBPAM Pro software, then I order it on the promise .com support ?? Regards, Albert

R P posted this 07 December 2020

Hi Albert,

WebPAM is not abailable for the J830s, WebPAM is a manegement tool for a raidhead, like the VTrak E830f.

And as said previusly, there is nothing to configure in a JBOD. The serial cable will work, you'll be able to see the enclosure status and link status on the phys, nothing more.

Albert Soubeyran posted this 07 December 2020

Thank you for your answers, where can I buy the cable ?? thank you very much for your competence and your seriousness. Albert

Close