Say I have a Pegasus2 R4 with a drive array of 4 drives. Can I safely do the following?

  • Power down the Pegasus2
  • Remove all four drives
  • Add four new drives
  • Power up the Pegasus2 and use it as an array
  • Power down the Pegasus2
  • Put in the original four drives
  • Power up the Pegasus2
  • Use the original drive array as before

As a further question: what if the "four new drives" are actually clones of the original ones? Will the Pegasus2 get confused and refuse to work with my original set?