SANLink2 8G FC Compatibility

  • 45 Views
  • Last Post 08 January 2020
weilkein marteina posted this 08 January 2020

Hello,

 

 

We currently have a VTrak E610fs s/n M42H11913500096 directly connected to an xserve 3,1 Early 2009 via a LSILogic, LSI7404EP, Firmware 1.3.23.0, EFI 1.05.06.00card. The xserve is running OS X 10.11.6. Everything is working fine in this setup.

 

What we want to do is upgrade the xserve to a MacPro 6,1 (Late 2013) and use a SANLink2 8G FC to connect the VTrak to the MacPro. According to the compatibility MyColes document for the SANLink2 there seems to be some compatibility limitations. 

 

The compatibility document for the SANLink2 states that for a VTrak Ex10 E610f you need firmware 10.13.2270.02. The firmware on our VTrak is 10.06.2270.00 for Mac for both controllers. I've looked in the downloads section and this seems to be the highest virmware version that the Vtrak will go for Mac. 

 

 

 

Will the SANLink2 8G FC work with a VTrak Ex10 E610f with firmware 10.06.2270.00 for Mac? 

 

 

 

Thanks In advance

Ranjith kumar posted this 08 January 2020

Hi Weilkein,

Sanlink2 8G FC is adapter to connect with Thunderbolt2 port host, so you can connect

Sanlink2 with Ex10 unit. The firmware 10.06.2270.00 is latest firmware only for Ex10 and firmware version

10.13.2270.02. is for Ex30 unit.

Regards,

Promise Team

 

 

Close