Firmware Update Y/N

  • 64 Views
  • Last Post 14 November 2018
Mark Aylward posted this 13 November 2018

Hi, I have an P2 R4, running 4, 4TB Black WD7200.

All is running really well since initial installation and configuration to RAID 0.

The firmware installed is 5.04.0000.18.

My question: Is there a newer firmware available AND would I be gaining any substantial benefit from the update?

 

Thanks

Order By: Standard | Latest | Votes
arunkumar b posted this 13 November 2018

Hi Mark,

5.04.00000.61 is the latest version of firmware for Pegasus2.It is  advisable to update the latest firmware at the earliest.You may experiencing slow performance if the unit is running in old firmware.

Here is the link to download the latest firmware file.

https://promise.com/DownloadFile.aspx?DownloadFileUID=4536

Please open a support case in https://support.promise.com if you need further assistance.

Regards

Arun

Mark Aylward posted this 14 November 2018

Well, as I was afraid. I did two updates to the Utilty App, and the third time the Firmware came up...

Now after it said it will reboot, the Drive is not recognized, and it did not power down...

:(

Mark Aylward posted this 14 November 2018

Whew!... OK so I had to power down the Drive by physically disconnecting the power cord... then I hooked everything back up... and Voila... Kinda scary... I hate doing this stuff..

Close