Failed to start rebuild: the array is incomplete - P2R4

  • 82 Views
  • Last Post 05 February 2020
David Green posted this 04 February 2020

I am trying to rebuild an array on PD 3&4 Raid 1.
I have replaced PD 4, marked as unconfigured but I keep obtaining the follwing message when I try to rebuild -  Failed to start rebuild: the array is incomplete

I cannot seem to find a work around. Any advice please

 

Attached Files

Order By: Standard | Latest | Votes
David Green posted this 04 February 2020

Solution: Turn it off and on for 12 hours!

Obviously I had already initially power cycled the unit and the mac as part of the trouble shooting list but I was not aware you had to let it have a good night's sleep, come back the next day turn it on and bingo - the array is now rebuilding. Crazy but I am very thankful it is working.

 

Raghuraman Kannan posted this 05 February 2020

Hi David,

Good to know that it is working. But next time if you have this issue, you just  have to accept the missing condition to start the Rebuild. No need to Power OFF the device and power it back ON.

Thanks !

Close