I am currently using a Seagate IronWolf 12TB drive (Model: ST12000VN0008) with a Promise A6120 system, running firmware SR1.5.
I would like to report that:
-
The drive is not being detected properly under CLI command
phydrv -v
or during initialization. -
I have confirmed with Seagate that the drive's firmware is up to date, and it uses a standard SATA interface under the IronWolf NAS line.
-
However, this model is not explicitly listed in the SR1.5 compatibility list.
Given that IronWolf drives are generally supported, and similar models function properly, I would like to know:
-
Does SR1.5 officially support ST12000VN0008 drives, even if not listed?
-
Is there any known workaround or patch to allow detection of this drive on the A6120?
-
Are there future firmware updates planned that will add support for this drive model?
Thank you for your help in resolving this compatibility issue.