i installed the promise utitly and the driver like in the discription also extension is allowed on my m2 studio. Unfortunately, I had no thunderbolt port at the mac studio to test the system under Sonoma.
will this wire work for data transfer?
Searching: SANLink3 T1 - 54 Results Found
Pegasus2 Pegasus 2 R4 (Thunderbolt 2) into Mac Studio M2
Matthias Götze
posted this
14 November 2024
- Last edited 14 November 2024
SuperTrak Replacing a disk in a degraded array (logical drive OK)
Adam Reece
posted this
09 November 2024
- Last edited 09 November 2024
Hello :)
Suddenly today there as an issue with a disk in an array. It appears as dead.
The array appears as degraded, but logical drive (RAID 5) is OK.
This has happened before, and I've just swapped in another empty hard disk without issue. However this time for some reason the new disk is just appearing as unconfigured without becoming part of an array.
The unusual aspect is that the logical drive is still appearing as OK instead of degraded. It's like the controller hasn't fully worked out that there's a problem.
What can I do to add the unconfigured drive to the degraded array? Commands `rebuild`, `migrate`, and `transit` don't seem to allow this. I'd quite like this to get done quickly as I don't like that one of the other disks is in PFA status, I want to replace that one manually too.
`phydrv` output:
===============================================================================
PdId Model Type Capacity Location OpStatus ConfigStatus
===============================================================================
1 ST1000DM005 SATA HDD 931.32GB Encl1 Slot1 OK Ary0 SeqNo0
2 SAMSUNG HD10 SATA HDD 931.32GB Encl1 Slot2 PFA Ary0 SeqNo1
3 SAMSUNG HD10 SATA HDD 931.32GB Encl1 Slot3 OK Ary0 SeqNo2
4 WDC WD2002FF SATA HDD 1.82TB Encl1 Slot4 OK Unconfigured
`array -v` output:
-------------------------------------------------------------------------------
DaId: 0
OperationalStatus: Degraded, PFA
Alias: Primary
PhysicalCapacity: 3.64TB ConfigurableCapacity: 3.64TB
FreeCapacity: 0Byte MaxContiguousCapacity: 0Byte
AvailableRAIDLevels: 0 5 6 10 1E
PDM: Enabled MediaPatrol: Enabled
NumberOfPhysicalDrives: 4 NumberOfLogicalDrives: 1
NumberOfDedicatedSpares: 0
Physical Drives in the Array:
===============================================================================
SeqNo PdId CfgCapacity FreeCapacity OpStatus
===============================================================================
0 1 931.32GB 2.57MB OK
1 2 931.32GB 2.57MB OK, PFA
2 3 931.32GB 2.57MB OK
3 4 931.32GB 2.57MB Dead, Not usable
Logical Drives in the Array:
===============================================================================
LdId Alias RAIDLevel Capacity OpStatus
===============================================================================
0 Primary RAID5 2.73TB OK
Available Spares to the Array:
===============================================================================
Id OpStatus PdId CfgCapacity Revertible Type DedicatedToArray
===============================================================================
No spare drive available in the array
`logdrv -v` output:
-------------------------------------------------------------------------------
LdId: 0
ArrayId: 0 SYNCed: Yes
OperationalStatus: OK
Alias: Primary
SerialNo: 00000000000000000000000018E3FFA831670258
WWN: 2204-0001-55f2-984d PreferredCtrlId: N/A
RAIDLevel: RAID5 StripeSize: 64KB
Capacity: 2.73TB PhysicalCapacity: 3.64TB
ReadPolicy: ReadCache WritePolicy: WriteThru
CurrentWritePolicy: WriteThru
NumOfUsedPD: 4 NumOfAxles: 1
SectorSize: 512Bytes RAID5&6Algorithm: right asymmetric (4)
TolerableNumOfDeadDrivesPerAxle: 1 ParityPace: N/A
CodecScheme: N/A
Thanks,
Adam
