Searching: SANLink3 T1 - 55 Results Found

VTrak Other VTrak M500f status is offline after replacing a disk
Carlton Teel posted this 15 August 2016

After replacing a failed disk in a VTrak M500f unit, the system has marked the Logical Drive as Offline.  Looking at the Physical Disk information and the Disk Array information, the system seems to be confused.  Is there a way to recover from this mode?  Below is the Physical Disk, Disk Array, and Logical Drive summaries.  Thanks.

CLU | Physical Drives Summary
==============================================================================
PdId Model              CfgCapacity Location     OpStatus       ConfigStatus
==============================================================================

1    ST3750640AS        698.49GB    Encl1 Slot1  OK             Array0 SeqNo0
2    ST3750640AS        698.49GB    Encl1 Slot2  OK             Unconfigured
3    ST3750640AS        698.49GB    Encl1 Slot3  OK             Array0 SeqNo2
4    ST3750640AS        698.49GB    Encl1 Slot4  OK             Array0 SeqNo3
5    ST3750640AS        698.49GB    Encl1 Slot5  OK             Array0 SeqNo4
6    ST3750640AS        698.49GB    Encl1 Slot6  OK             Array0 SeqNo5
7    ST3750640AS        698.49GB    Encl1 Slot7  OK             Array0 SeqNo6
8    ST3750640AS        698.49GB    Encl1 Slot8  OK             Array0 SeqNo7
9    ST3750640AS        698.49GB    Encl1 Slot9  OK             Array0 SeqNo8
10   ST3750640AS        698.49GB    Encl1 Slot10 OK             Array0 SeqNo9
11   ST3750640AS        698.49GB    Encl1 Slot11 OK             Array0 SeqNo10
12   ST3750640AS        698.49GB    Encl1 Slot12 OK             Array0 SeqNo11
13   ST3750640AS        698.49GB    Encl1 Slot13 OK             Array0 SeqNo12
14   ST3750330NS        698.49GB    Encl1 Slot14 OK             Unconfigured
15   ST3750640AS        698.49GB    Encl1 Slot15 OK             Global Spare

CLU | Disk Array 0 Physical Drives
==============================================================================
 SeqNo  PdId   CfgCapacity  FreeCapacity  OpStatus
==============================================================================

 0      1      698.49GB     243KB         OK
 1      14     698.49GB     243KB         OK
 2      3      698.49GB     243KB         OK
 3      4      698.49GB     243KB         OK
 4      5      698.49GB     243KB         OK
 5      6      698.49GB     243KB         OK
 6      7      698.49GB     243KB         OK
 7      8      698.49GB     243KB         OK
 8      9      698.49GB     243KB         OK
 9      10     698.49GB     243KB         OK
 10     11     698.49GB     243KB         OK
 11     12     698.49GB     243KB         OK
 12     13     698.49GB     243KB         OK
 13     14     698.49GB     243KB         OK

CLU | Logical Drives Summary
==============================================================================
LdId Alias       OpStatus    Capacity  Stripe RAID    CachePolicy     SYNCed
==============================================================================

0    LD0         Offline     8.87TB    64KB   RAID5   RAhead/WBack    Yes

 

  • 0
Thunderbolt™ Pegasus Family Drive offline after power down
nick pomf posted this 16 April 2016 - Last edited 16 April 2016

Thanks for the reply, but I'm not sure you understand.  I swapped the disks in bays 3 & 4 as you suggested to see if there was a problem with one of the bays.  Now the 2nd blue light isn't coming on for either drive.  I've put them back again, and the phydrv command is showing this still:

 

cliib> phydrv

===============================================================================

PdId Model        Type      Capacity  Location      OpStatus  ConfigStatus     

===============================================================================

1    Hitachi HDS7 SATA HDD  1TB       Encl1 Slot1   OK        Array0 No.0      

2    Hitachi HDS7 SATA HDD  1TB       Encl1 Slot2   OK        Array0 No.1      

3    Hitachi HDS7 SATA HDD  1TB       Encl1 Slot3   OK        Array0 No.2      

 

Lost Physical Drives

===============================================================================

PdId Model              PhyCapacity Location       OpStatus   ConfigStatus     

===============================================================================

 

4    ATA                0Byte       Unknown        Missing    Array0 No.3  

I've now repaced the drive in bay 4 with a new one.  Is there a good example online that shows how to rebuild the array?  I can't click 'rebuild' as the button isn't enabled:

 

  • 0
Search
Categories
Close